Quick Turn Financial
Tax Strategy6 min read

Section 179 in 2026: The Complete Guide for Machine Shops

April 2026

If you buy equipment for your machine shop in 2026 and don't use Section 179, you're leaving money on the table. Potentially a lot of it. This guide covers the 2026 limits, how 100% bonus depreciation works alongside Section 179, and — most importantly — how financing your equipment can make the tax math even better.

What Is Section 179?

Section 179 is a federal tax provision that lets businesses immediately deduct the full cost of qualifying equipment in the year it's purchased and put into service — rather than depreciating it over several years. Instead of writing off a $200,000 CNC machine over five years, you can deduct the entire $200,000 in year one.

This accelerated deduction directly reduces your taxable income. If your shop is profitable and paying a 30% effective tax rate, a $200,000 Section 179 deduction is worth $60,000 in real tax savings.

2026 Section 179 Limits

  • Deduction limit: $2,560,000 — you can deduct up to $2.56M in qualifying equipment purchases
  • Phase-out threshold: $4,090,000 — the deduction starts to phase out once your total equipment purchases exceed this amount
  • Must be placed in service: The equipment must be operational in your facility by December 31, 2026

These limits reset each year, so equipment purchased in prior years doesn't count against this year's cap.

Bonus Depreciation in 2026: Back to 100%

Big news for 2026: bonus depreciation has been restored to 100% under the One Big Beautiful Bill, signed into law in early 2025. After phasing down from 100% in prior years, the full first-year write-off is back — and it applies to both new and used equipment.

Here's how the two work together: Section 179 applies first, up to the deduction limit. Bonus depreciation then applies to any remaining basis. For most machine shops, Section 179 alone handles the full deduction on most purchases. But with 100% bonus depreciation restored, shops buying above the $2.56M Section 179 cap can still write off the full amount in year one.

What Equipment Qualifies?

Almost all manufacturing equipment qualifies for Section 179, including:

  • CNC machining centers, lathes, and turning centers
  • Injection molding machines
  • Press brakes, shears, and punch presses
  • Fiber laser and waterjet cutting systems
  • Grinding machines and EDM equipment
  • Robotics and automation systems
  • 3D printing and additive manufacturing equipment
  • Packaging and processing equipment

Both new and used equipment qualify — you don't need to buy brand-new to get the deduction.

How Financing Makes Section 179 Even Better

This is where it gets powerful. Section 179 applies to the full cost of the equipment — not just the amount you paid out of pocket. If you finance a $300,000 VMC with $30,000 down, you can still deduct the full $300,000 under Section 179 in year one.

So your cash outflow is $30,000 (down payment) plus monthly payments, but your tax deduction is $300,000. At a 30% tax rate, that's a $90,000 tax savings — three times your down payment — in year one.

This is why we always run Section 179 scenarios for our customers before structuring a deal. It frequently changes the decision from “let's wait” to “let's do it before December 31st.”

A Real Example

Let's say you're buying a used Haas VF-4 for $85,000, financing 100%:

  • Equipment cost: $85,000
  • Section 179 deduction: $85,000
  • Tax savings at 30%: $25,500
  • Monthly payment (84 months at 7%): ~$1,290
  • After-tax cost in year one: $15,480 (12 payments) minus $25,500 tax savings = net positive cash flow in year one

The equipment pays for itself in tax savings before you make a full year of payments.

Key Deadlines

Equipment must be placed in service by December 31, 2026 to qualify for this year's deduction. That means the machine needs to be installed and operational — not just ordered or in transit. If you're buying from a dealer or auction, factor in delivery and installation time when planning your timeline.

Quick Turn can often fund and close equipment deals in 3–5 business days, which matters when you're racing a year-end deadline.

Have Questions About Your Deal?

Call Bob Daly's team directly — no call centers, no waiting.